Click on each of the photos to bring up a larger (slower to load so please be patient)
image of the products. |
Part# 1/2A-UP
is our 1/2A Motor Mount/Tank with clunk for upright mounted engines.
Fly your 1/2A for 15 minutes while doing aerobatics.
Works well with throttle equipped Norvell and Cox 1/2A engines.
For shorter flights without a throttle equipped motor just don’t fill the tank.
Avoid the fuel draw problems and the plumbing nightmare created by having a tank in the fuselage.
Tank is available in two versions; this upright mounted model, or our side mounted version (Part# 1/2A-SIDE).
Fly inverted to your hearts content with our in-tank clunk system.
Clunk and Fuel tubing included.
*Note-Tank does not include motor; Shown for demonstration purposes only.
Click on photo to bring up assembly instructions.
|
Part# 1/2A-UP
$12.95 each or 2 for $20.00
|
 |
Part# 1/2A-SIDE
is our 1/2A Motor Mount/Tank with clunk for side mounted engines.
Fly your 1/2A for 15 minutes while doing aerobatics.
Works well with throttle equipped Norvell and Cox 1/2A engines.
For shorter flights without a throttle equipped motor just don’t fill the tank.
Avoid the fuel draw problems and the plumbing nightmare created by having a tank in the fuselage.
Tank is available in two versions; this side mounted model, or our upright version (Part# 1/2A-UP).
Fly inverted to your hearts content with our in-tank clunk system.
Clunk and Fuel tubing included.
*Note-Tank does not include motor; Shown for demonstration purposes only.
Click on photo to bring up assembly instructions.
|
Part# 1/2A-SIDE
$12.95 each or 2 for $20.00
|
 |
Part# PN1/2A-N
is our 1/2A Propnut for Norvell Engines. Machined from Aircraft Grade 6061-T6 Aluminum.
Cone shape design for superior preformance with electric starters.
Comes with bolt threaded to fit Norvell 1/2A Engines.
|
Part# PN1/2A-N
$4.95 each or 2 for $8.00
|
|
|
Part# PN1/2A-C
is our 1/2A Propnut for Cox Engines. Machined from Aircraft Grade 6061-T6 Aluminum.
Cone shape design for superior preformance with electric starters.
Comes with bolt threaded to fit Cox 1/2A Engines.
|
Part# PN1/2A-C
$4.95 each or 2 for $8.00
|
|
Part# NG-01 is our nosegear designed specifically to fit in the 1/3rd scale Grumman American Lynx.
We use the finest materials.
Click on the plane to see the Model Airplane News
article about the plane and nosegear.
|
Part# NG-01
$175.00
|
 |
Part# WP-51 is our 4.8 Inch Diameter wheel for 1/5th scale P-51s.
Designed specifically to fit in Aerotech's P-51 Scale Kits as well as Yellow Aircraft's and Top Flight's P-51s.
We use the finest grade 6061-T6 Aircraft Aluminum,
Stainless steel screws and Bronze Oil-Lite Bushings for longer life.
Each rim is built in two sections that bolt together and is meticulously deburred and hand polished.
The rubber we use is manufactured for us by "Du-Bro" because we feel this is the best available.
Our unique tire is designed with a built in "Bead-Lock" that securely locks the rubber onto the rim.
Click on the photo to see both the front and back sides. Weight: 8.3 oz. with tire.
|
Part# WP-51
$119.95 pair or $65.00 each
|
 |
Part# WP-47D is our 5 Inch Diameter wheel for 1/6th scale P-47D's.
An excellent choice for your Yellow Aircraft or Top Flight's P-47D.
We use the finest grade 6061-T6 Aircraft Aluminum,
Stainless steel screws and
Bronze Oil-Lite Bushings for longer life.
Each rim is built in two sections and meticulously deburred and hand polished.
The back side of the rim has a simulated brake drum for scale appearance.
Rim is assembled with "Du-Bro's" 5.00" (127mm) T.L. tire.
Click on the photo to see both the front and back sides. Weight: 8 oz. with tire.
|
Part# WP-47D
$119.95 pair or $65.00 each
|
 |
Part# RLG-1.
In our opinion this is the finest retract for planes weighing 20 to 40 pounds!
This landing gear was designed for and is used in Aerotech's P-51 and Frank Planes.
Machined from high quality, aircraft grade aluminum.
What makes our retract design so unique is that it utilizes a closed trunnin to prevent bending, and a double
cinched strut mounting to avoid strut twisting.
Strut is air actuated. Weight 6 oz. each.
Length 5", Width 1-1/4", Total Closed Height 1-1/8"
Base mounting plate measures: 2-5/8" wide by 2-1/4" long.
|
Part# RLG-1
$250.00 /pair
|
 |
Part# Axle-1/4x1.5
is our 1/4 inch axle for Sport Rims.
Made of music wire for strength and nickle plating for corrosion and wear resistance.
Comes with nylon insert locking nut.
|
Part# Axle-1/4x1.5
$4.50 per pair with Nuts
|
 |
JN-Series
are our jam nuts designed to help prevent the drive washer,
propeller, and spinner from kicking back and coming off, especially on 4 cycle engines.
They are machined from aircraft grade aluminum and are
the same diameter as the "Du-Bro" Prop nuts and the new "Goldberg" prop nuts for
an integrated look. Available in 3 differnt thread sizes to fit a wide range of engines.
1/4"- 28, 5/16"- 24, and 7mm x 1. (Please specify thread size when ordering. See specific Part Numbers.)
Currently available in an annodized red finish.
|
Part# JN-1/4-28 Part# JN-5/16-24 Part# JN-7x1
$4.95 each
|
 |
Part# Q500
is our Quickie 500 back plate mount for "OS 46AX" Engines.
Made to Quickie 500 dimensions for Pylon Racing and Sport Flying.
Machined from high quality aircraft aluminum.
|
Part# Q500
$14.95
|
 |
Part# RBP-1
is our rubber band puller to help you get slippery rubber bands off your plane after flying.
Don't puncture your monokote with a screwdriver ever again!
Many other uses like pop can tab pulling! Buy one today!
|
Part# RBP-1
$2.00
|
 |
Part# ETS-1 is our Rail Mounting Engine Test Stand.
Recommended for .15 through 2.1 cu.in. engines.
Stand made of 6061-T6 Aircraft Aluminum with Stainless Steel
Mounting rails.
Stainless is passifed for durability.
Fuel tank can be mounted on either the right or left side,
and is fully adjustable vertically to locate the tank to the
centerline of the carburetor.
Throttle linkage can be mounted in four different locations allowing
use with two-stroke or four-stroke engines.
Base Plate pre-drilled with mounting holes to secure stand to work bench.
Stand includes various size mounting screws, throttle rod and allen wrenches.
*Note-Stand does not include motor or fuel tank;
Shown for demonstration purposes only. |
Part# ETS-1
$125.00 |
 |
Part# ETS-2 is our Test Stand for Back Plate Mounted Engines.
We recommend this style for 1.2 through 5 cu.in. motors.
A Fuel Tank can be mounted on either the right or left side,
and is fully adjustable vertically to locate the tank to the
centerline of the carburetor.
Throttle linkage can be mounted in four different locations.
Base Plate pre-drilled with mounting holes to secure stand to work bench.
Stand includes throttle rod and allen wrenches and comes with the universal
back plate #AP-1. Test stand can be ordered with the Custom drilled angle plate (#AP-Custom)
in place of #AP-1 at no extra charge. (See accessories listed below)
*Note-Stand does not include motor or fuel tank; Shown for demonstration purposes only.
|
Part# ETS-2
$125.00 |
 |
Part# EZ-Cleat
is the fastest and easiest way to secure a rope for any purpose.
Excellent for use around boats, cars, trailers, tarps, docks, banners,A.T.V's, and garages.
Low profile design prevents fishing rod and net snags.
For use with ropes up to a maximum diameter of 3/8 inch.
Secure your rope with one hand.
Quick no knot fastening.
Easy to install and use.
Lifetime Guaranteed stainless steel springs.
The most user friendly cleat on the maket!
|
Part# EZ-Cleat
$9.95
|